ReSound ENZO 3D - Cleaning Earmolds

32
10.2 i Cleaning earmolds
1. Detach the earmold and tubing from the hearing aid before cleaning
2. Use a mild soap to clean the earmold and rinse with lukewarm water
3. Dry the earmold thoroughly. Use the airbulb and cleaning wire to remove residual water and
debris from the tubing
i
NOTE: Use the hook to remove wax etc.
NOTE: We recommend that you change the tube every three months or sooner if it gets sti or
brittle.
Pull the earmold and device apart. Use air bulb to remove residual water.
400738011US-17.07-Rev.B.indd 32 03-07-2017 13:51:31