Flight Mode / Wireless Communication Off Mode (optional)
Your hearing aids can receive wireless signals. For example, they can be controlled from your mobile device or
remote control. Information transmission can also take place between your hearing aids. However, in some
areas you are requested to turn off wireless communication.
CAUTION:
• This hearing aid contains a radio frequency transmitter. When boarding a flight, follow airline
instructions and turn off hearing aid wireless functionality when and as directed.
• Turn off hearing aid wireless functionality when this is required.
NOTE: You must follow the processes below for both hearing aids, even if synchronization is enabled.
Turning off wireless communication (activating Flight Mode)
1. Turn off your hearing aid.
2. Press the button for 9 seconds.
3. Your hearing aid will double-flash four times. If you are wearing your hearing aids at the time, you will hear
double tones ( ) for about 10 seconds, meaning the hearing aid is now in Flight Mode.
Activating wireless communication (turning off Flight Mode)
1. Turn your hearing aid off and then on.
2. Wireless communication will be activated after 10 seconds.
32 Advanced options
To Next Page
Loading...
Need help?
General
