17
When using the multi-function button to switch programs, each press will move the instrument to the next
program. For example, if it was in program 1 it will switch to program 2, if it was in program 2 it will switch
to program 3 etc.
When you close the battery door and switch the instrument on, it will start in program 1. Press the multi-
function buttons if you want to move to a different listening program.
If you have two hearing instruments with the synchronization function enabled, program changes to one
instrument will automatically repeat in the second instrument. When a program change is made in one
instrument, you will hear the same amount of confirmation beeps in the second instrument.
Your instrument has a fully automatic volume control. Therefore, it should not be necessary to control the
volume manually.
However, in addition to controlling listening programs, the multi-function button provides you with the ability
to adjust the amplification to your liking.
400500011-US-16.07-Rev.A.indd 17 05-07-2016 12:18:45
To Next Page
