ReSound Vea Fitting GuideReSound Vea Fitting Guide
M200701-GB-12.01-Rev.B
New Zealand
Ground Floor, North Entrance
4 Fred Thomas Drive
Takapuna
Auckla nd, 0622
Tel.: (free) 0800 90 0 126
Fax: (fre e) 0800 007 695
www.gnresound.co.nz
United Kingdom
GN ReSound Ltd.
Kirtlington Business Centre
Portway
Kirtlington
Oxon OX5 3JA
Tel.: +44 1869 352 800
Fax: +44 1869 34 3 466
www.gnresound.co.uk
Australia
GN ReSou nd Pty. Ltd.
Unit R1 Rege nts Park Estate
391 Park Road
Regents Park NSW 2143
Tel.: (free) 1800 658 955
Fax: 02 9743 7472
www.gnresound.com.au
Canada
GN ReSound Canada
303 Supe rtest Road
Toronto, Ontario
CANADA M3J 2M4
Tel.: +1 888 737 6863
Fax: +1 800 666 4089
canada@gnresound.com
www.gnresound.ca
Worldwide headquarters
ReSound A/S
Lautrupbjerg 7
DK-2750 Ballerup
Denmark
Tel.: +45 45 75 11 11
Fax: +45 45 75 11 19
www.resound.com
ReSound
®
provides excellent sound by offering innovative
hearing solutions that combine original thinking and design
with solid technology – all based on deep audiological insight
and a profound understanding of the hearing impaired.
Now, ReSound Vea
TM
raises the bar again. A small, discreet
instrument, delivering strong, invisible connections to the
important things in life. www.resound.com/vea
ReSound a nd rediscover he aring are registe red trademarks o f the GN ReSound Gro up. © 2010 the GN ReSound Grou p, all rights reser ved.
This fitting guide gives an overview of how to fit ReSound Vea hearing instruments
with Aventa 3.3. A ReSound Vea 3 fitting is assumed here. Note that not all features
mentioned here are available in ReSound Vea 2 and ReSound Vea 1. The Aventa 3.3
fitting software supports all ReSound instruments built on the ReSound Range
TM
chip.
The ReSound Range
TM
chip was introduced with ReSound Alera.
Getting Started
Prior to connecting to Aventa
®
3.3:
1. Select the appropriate hearing instrument(s) for the
patient’s hearing loss.
2. ReSound Vea requires a battery when fitting. Make sure
the battery is fresh and that it is inserted correctly.
3. ReSound Vea must be fitted with cables, make sure that
the programming interface (Speedlink, Hi-PRO or NOAHlink)
is connected to the PC.
Note that a new programming adaptor is required to fit
ReSound Vea, named Programming Adaptor II.
4. Launch Aventa 3.3. For new fittings, Aventa 3 begins in the
Start screen, where the client’s experience with amplification
can be selected, the programming interface can be chosen,
and connection to hearing instrument(s) can be established.
Choose patient
experience level
Click “Connect”
To Next Page
Need help?
General
