Need help?Do you have a question about the Respironics DreamStation and is the answer not in the manual?
General| Adjustable Humidity Levels | Yes |
|---|---|
| Heater Plate Material | Aluminum |
| Water Capacity | 325 ml |
| Compatibility | DreamStation CPAP, BiPAP |
| Humidification Levels | 5 levels |
| Humidification Technology | Heated humidification |
| Heated Tube Option | Yes |
Describes the components and function of the DreamStation Heated Humidifier system, including the heated humidifier, water tank, and heated tubing.
Provides information on service technician requirements, training availability, and product support contact details.
Defines the meaning of WARNING, CAUTION, and NOTE indicators used throughout the manual.
Instructions for connecting DC and AC power to the DreamStation therapy device.
Steps for connecting the therapy tubing to the PAP device and the humidifier.
Guide for installing and replacing the reusable blue pollen and disposable ultra-fine air filters.
Procedure for powering on the device and navigating through user and provider menus.
Details on using the performance check tool and pairing the device with Bluetooth-enabled mobile devices.
Procedures for initial device inspection and verifying system pressure.
Information on downloading and using the software suite for device servicing and data retrieval.
Lists various device error codes, their descriptions, failed components, and recommended actions.
Guides for diagnosing and resolving common device problems and failure modes.
Explains different types of device alerts, their icons, descriptions, possible causes, and actions.
Lists available replacement parts and their corresponding kit numbers for the DreamStation device.
Detailed steps for replacing various components like the SD card, enclosure, UI panel, PCA, and blower.
Instructions for cleaning the therapy device for single and multiple users, including filter maintenance.
Lists part numbers for replaceable components of the DreamStation Humidifier.
Step-by-step instructions for replacing parts of the humidifier, such as the water tank, seals, and lid.
Procedures for cleaning the water tank, humidifier base, heated tubing, and hospital-grade disinfection.
Lists the necessary hardware, software, and PC requirements for device testing.
Ensures the device is ready for testing by checking error logs, clock accuracy, and environmental conditions.
Step-by-step guide for performing the final device testing and calibration using the Test Executive software.
To Next Page
