2
www.restek.com
Operating Instructions
1.0 Introduction
Restek’s portable Leak Detector is specifically designed for use with gas chro-
matography (GC) systems. It detects minute leaks of any gas with a thermal
conductivity different from air. The reference gas inlet (Figure 1) draws in
ambient air for comparison to air drawn into the sample probe. A leak is
indicated by both an LED light display and an audible alarm.
Restek’s Leak Detector is manufactured by Restek so you are assured of the
same Restek quality and service you have come to recognize with the Restek
name.
Should you require assistance at anytime regarding our Leak Detector, please
contact Restek Technical Service at 1-800-356-1688 or 814-353-1300, ext. 4.
To Next Page
Loading...