What to do if my throat and nose feel too dry using ResWell RVC830 Medical Equipment?
If you experience a dry throat and nose, it's likely due to the air being too dry. To resolve this, increase the humidity in your room and turn on the humidifier function of your ResWell Medical Equipment.
Why does the airflow from my ResWell RVC830 mask feel warmer than usual?
The airflow may feel warmer than usual if the air filter is dirty, the equipment is under sunshine, or there is a heater nearby. Clean or change the filter. Ensure the equipment has proper ventilation and is kept away from blinds, bedding, direct sunlight, and heaters. If the problem persists, contact your home care provider.
What to do if my ResWell RVC830 mask feels uncomfortable or is leaking air?
If you feel uncomfortable when wearing the mask or notice air leaking, it's likely that the mask is not correctly worn. Adjust the mask according to the provided instructions. If the problem continues, contact your home care provider.
What to do if my ResWell RVC830 won't run or has no airflow when I press the power button?
If the equipment doesn't run or there's no airflow when you press the power button, the turbine may have problems. Try restarting the equipment. If that doesn't work, move the equipment away from sources of electromagnetic radiation like mobile phones, non-line phones, computers, electronic game machines, and hair dryers. If the issue persists, contact your home care provider.
What to do if my ResWell Medical Equipment has no power when turned on?
If there is no reactivity when you power on the ResWell Medical Equipment (no sound, no backlight), it may be due to a lack of power in the socket or incorrect insertion of the equipment. Check that the socket has electricity, ensure the equipment is correctly inserted, and confirm the AC power cord is properly connected to the power socket.
Why is the ramp function not working on my ResWell Medical Equipment?
The ramp function may not work if the setting pressure is already at the minimum value, or if the ramp initial pressure equals the setting pressure. Increase the setting pressure or decrease the ramp initial pressure.
Instructions to check contents after unpacking the device.
Guides on correctly installing the air filter and its cap.
Steps for connecting the power cord to the device and outlet.
Details on connecting the mask, tubing, and exhalation port.
Explains device buttons and how to navigate settings.
Covers patient operation, treatment pressure, time, SpO2, and PR display.
Explains how to set the ramp time for patient comfort.
Details setting the initial pressure for the ramp feature.
General| Brand | ResWell |
|---|---|
| Model | RVC830 |
| Category | Medical Equipment |
| Language | English |
To Next Page
