Retevis RA85 - Page 8

18
19
Scan Mode
PTT-ID
20 MDF-A
21 MDF-B
TO
CO
Time scan
Carrier scan
Search mode scanSE
OFF Press PTT to not send ID code
Press PTT to send ID code (ID code is set by frequency
writing software)
Release PTT to send ID code
ID code is sent when you press and release the PTT button
In the channel mode of the A segment, the channel displays
the frequency
In the channel mode of section A, the channel displays the
channel name (the specific name is set in the frequency
writing software)
In the channel mode of section B, the channel displays the
frequency
In the channel mode of section B, the channel displays the
channel name (the specific name is set in the frequency
writing software)
BOT
EOT
Frequency
Name
Frequency
Name
BOTH
22 Busy Lockout OFF Allowed to transmit when channel is occupied and
ON Forbide to transmit when channel is occupied
23 Key Auto Lock OFF Automatic keyboard lock off
ON Automatic keyboard lock on
24 Key1 sp OFF No function
LAMP Turn on the flashlight function
SOS Turn on the alarm function
FM Turn on the radio function
NOAA Turn on NOAA weather forecast function
MONI Turn on the monitoring function
SEARCH Turn on the searching function
25 Key1 LP Same function as side key 1 short press
26 Key2 sp Same function as side key 1 short press
27 Key2 LP Same function as side key 1 short press
28 Alarm Mode On site
Send sound
Send code
29 TAIL OFF After the PTT is released, the radio does not send a shutdown
code, usually when it is relayed through the relay, let it make
noise to confirm whether the signal of the radio is relayed
ON After releasing the PTT button, the radio sends a shutdown
code to suppress the instantaneous noise of the listener
30 PROGER OF Turn off the call end alert tone
ON Turn on the call end alert tone
31 Language Chinese
English
6