Retevis RT69 - Radio Repeater Functions; Repeater PTT and Speaker Settings; Repeater Type Selection; Same Frequency Repeater Setup

5453
3. The using of radio repeater function:
1. The selective of “RPT-PTT” repeater PTT
Under the standby states, press [MENU]+[3 SAVE][9 VOICE], Screen display
Press [MENU] to enter, Press [UP]/[DOWN] to select ON(open) then Press[MENU] to confirm, and Press [EXIT]
back to standby.
2. The selective of “RPT-SPK” repeater SPK
Under the standby states, press [MENU]+[3 SAVE] [8 W/N], Screen display
Press [MENU] to enter, Press [UP]/[DOWN] to select ON (open) then Press [MENU] to confirm, and Press [EXIT]
back to standby.
3. The repeater type selective of “RPT-SET”
Entering into cross band repeater: under the standby states, press [MENU]+[3 SAVE][8 W/N], the Screen display
Press [MENU] to enter, Press [UP]/[DOWN] to select dual direct cross band repeater (X-TWRPT), or select the
directional cross band repeater (X-DIRPT) then Press [MENU] to confirm, exiting to menu and back to standby
states, long press [RPT] with 2 seconds, now the radio enter into cross band repeater states.
RPT-SET
RPT-SPK
RPT-PTT
Same Frequency RPT operation(two pcs radio)
First, the frequency setting：
1. Turn on the radio and press the VFO/MR key to set the working mode of the A and B areas of the screen to the
frequency mode. (Note: Press the EXIT A/B button in the A and B areas. Where is the MAIN letter at the top left of
the screen. The main frequency zone, the other zone is automatically the sub-frequency zone);
2. The two radios can be in Zone A or Zone B, one of which has an input transmitter frequency of 441.06250MHz
and the other input receiver frequency of 443.00500MHz
3. The other zone of the two radios inputs any frequency band of 136-174MHz. It should be noted that the frequency
range of the other zone of the two radios be the same, and it should be noted that the input frequency band is not
exactly equal to the transmitter or receiver, 3 times frequency can easily interfere with each other (eg 441.06250
divided by 3 equals 146.68750, 443.00500 divided by 3 equals 147.66833);
Second, the function settings:
1. Press [MENU]+[4 TXP]+[MENU] enter transmit power, then press the up and down keys (△▽) to select the [low
power] + [MENU] to confirm;
2.Press [MENU]+[3 SAVE][7 VOX]+[MENU] enter RPT-SET，then press the up and down keys (△▽) to select
X-TWRPT + [MENU] to confirm（Note: The factory default is cross-band two-way Repeater）
3. Press [MENU]+[3 SAVE][8 W/N]+[MENU] to enter RPT-SPK，then press the up and down keys (△▽) to select
[ON]+ [MENU] to confirm(Note: The factory default is off, it is generally not recommended to open);
4. Press [MENU]+[3 SAVE][9 VOICE]+[MENU] to enter RPT-PTT，then press the up and down keys (△▽) to