Cover Use and Maintenance
USE
Opening and using the cover
To use your cover, open the lock cover and press the button
at the center of the latch to pop open the handle.
Closing and locking the cover
To latch your cover anywhere along the rail, push down rmly on the end of the lock handle.
Insert the key and turn until it is locked or unlocked.
Lock cover adjustment
A 3/32” Allen wrench can be used to adjust the pointed set-screw on the lock arm. Turn
clockwise to increase latching pressure on the rail, or turn counter-clockwise if the lock is too
hard to close.
Securing loose cargo
Retractable covers help in transporting loose and large cargo, a unique feature that most bed
covers cannot claim. NOTE: Cargo should still be secured to the truck bed to prevent it from
coming loose.
To help secure any item too big to t under the cover, latch the lock handle shut against the
item to help keep it in place.
MAINTENANCE & CARE
Cleaning and caring for your cover.
You can wash the cover, but do not use any cleaners, protectants or strong chemicals.
The cover should be cleaned with mild soap and water.
Do not allow gasoline to come in contact with the cover.
The weather stripping may absorb soapy residue from a car wash, it is recommended to wipe
down the inside of the rails from time to time.
IMPORTANT: NEVER spray any lubricant or cleaner in the rails.
THIS WILL VOID THE WARRANTY.
The bearings are sealed and will not need any lubricant or spray.
If the rails feel sticky, run paran wax along the rail.
Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax is Retrax Holdings, LLC, 2023
4000-174 IR-RTS-01 Rev. 10.17.23
To Next Page
Loading...
