2
Copyright 2015 RetroBelt USA, LLC
WELCOME
Thank you for purchasing a RetroBelt
®
3-point seatbelt kit. This two
passenger retractable lap and shoulder system is perfect for front
bench seat installations. This system features a 20-inch push-button
buckle and all hardware needed for installation into your 1955-57
Chevrolet. The retractor is an inertia locking system that locks during a
sudden stop or with any unintended motion. This installation requires
advanced fabrication skills to install anchor points. By choosing to
install a RetroBelt
®
3-point system, you’ve chosen to invest in the
safety of yourself and your family.
General Features
• Twenty inches of webbing on receiver (perfect for bench seat installations)
• Meets or exceeds federal motor vehicle safety standards
• Grade 5 hardware kit
• Grade 5 mounting hardware included
• Starburst push-button buckle and chrome belt ends
• Eight colors available with color-matched retractors
• 1 year parts and labor warranty
The information enclosed in this manual is to be used as a guide to assist you
with installation and operation of your seatbelts. This guide does not cover every
installation possibility, vehicle, or aspect of the installation process.
RetroBelt USA, LLC, or its subsidiaries, assume no responsibility for any installation.
This manual may be updated from time to time.
Visit our website for the latest version: www.retrobelt.com.
To Next Page
Loading...