7
INSTALLATION GUIDELINES
Front Installation for Sedan or Wagon
If your car is a sedan or wagon, you will need to mount the
shoulder harness to your vehicle’s B pillar. This is the most difcult
part of the installation process. We recommend using one of these
two options to do this.
Option 1 (recommended option)
One way to install the anchor point is to weld the anchor mount
to the B pillar. Fully integrate the mount into the pillar to allow the
shoulder mount to be bolted solidly to the B pillar (See Figure 3).
We recommend that this done by a professional installer.
Figure 3
Weld the anchor mount
to the B pillar
Anchor mount fully
integrated into
the B pillar by welding
To Next Page
Loading...