3
INSTALLATION HARDWARE
The installation hardware below is designed to cover as many
variations of the 1955-57 Chevrolet as possible. If your vehicle
has existing anchor points installed, you may not need all of this
hardware. Feel free to contact us if you have any questions.
The retrotting instructions in this manual are only to be used as a
guide for installing anchor points in vehicles that are not already
equipped with them. The retrotting steps in this manual should
only be performed by a professional installer to ensure that the
installation is as safe as possible.
Grade 5
Anchor Mount
QTY: 2
Grade 5
Anchor Adapter
QTY: 2
7/16” Grade 5 Hex
Anchor Bolt
QTY: 2
2.48” Oversized
Fastener/Anchor
QTY: 6
7/16” Nut
QTY: 14
7/16” Washer
QTY: 10
7/16” Grade 5
Hex Anchor Bolt
QTY: 8
7/16” Nylon
Spacers
QTY: 8
7/16” Grade 5 Hex
Shoulder Anchor Bolt
QTY: 2
To Next Page
Loading...