RetroTINK 2X Quick Start Guide VideoGamePerfection.com
Troubleshooting
Symptom Possible Cause Solution
No image Sync lost Power cycle RetroTINK 2X
No image 480p (or higher) signal fed in Change input resolution. RetroTINK
2X supports 240p and 480i signals
only
No image/distorted image Transcoding mode selected on HDMI
device
Select line double mode, most HDMI
devices do not support 240p via
HDMI
Image has a vertical flicker/shimmer
effect
Interlace source connected This is a normal side effect of lag-free
deinterlacing, no action is required
Picture is black and white Wrong input selected Press input button and select
appropriate input
RetroTINK 2X resets itself Power supply insufficient Use a different USB port that provides
at least 1 amp of current, or purchase
a dedicated power supply
Page 8
To Next Page
Loading...
