Rev-A-Shelf ML-450SC-WS-1 User Manual

This is a spring loaded
product that can cause
severe harm if not handled
properly during installation.
WARNING
TOOLS REQUIRED:
30–45 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
• Clean with a damp cloth and
wipe parts dry
• Lubricate pivot points as
needed
HEAVY DUTY APPLIANCE LIFT
10
mm
#2
3
mm
A. B.
C.
LEFT & RIGHT
Parts List
No. Description Qty
A 10 g x 16 mm Wood Screws 16
B 10 g x 13 mm Wood Screws 12
C Side-Mounting Brackets (L & R) 2
D Shelf 1
INSTALLATION INSTRUCTIONS: HEAVY DUTY APPLIANCE LIFT
I-MLWHSHELF-0118
D.

Rev-A-Shelf ML-450SC-WS-1 Specifications

General

Brand	Rev-A-Shelf
Model	ML-450SC-WS-1
Category	Indoor Furnishing
Language	English

Summary

Installing Side Mounting Brackets

Mounting Side Brackets

Mark and pre-drill pilot holes, mount side brackets to cabinet, and fasten with screws.

Mounting the Appliance Lift Shelf

Attaching Shelf to Mounting Plates

Align shelf holes with mounting plate slots and insert screws loosely.

Adjust Shelf Side Edges

Aligning Shelf Edges

Adjust shelf side edges to the 90-degree bend of the mounting plate and tighten screws.

Complete Shelf Installation

Securing Shelf with Additional Screws

Attach additional wood screws from underneath the shelf to complete the installation.

Level Adjustment

Ensuring Shelf Levelness

Use a level, loosen front slots on mounting brackets, adjust shelf, then tighten screws.

Adjusting Appliance Lift Spring Tension

Setting Spring Tension

Adjust spring tension using a wrench for different weight capacities (0-27 kg).