Rev-A-Shelf 448 - User Manual

PARTS LIST
3
2
4
1
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
448 PULLOUT BASE ORGANIZERS
TOOLS REQUIRED:
20 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
7
64
3
32
2
mm
#2
3
8
I-448-0319
Description QTY
1
Base Unit
1
2
#8 x 3/4” Pan Head
Sheet Metal Screws
4
3
#6 x 1/2” Flat Head
Sheet Metal Screws
4
4
Spacer Kit
1
INSTALLATION INSTRUCTIONS: 448 PULLOUT BASE ORGANIZERS

Summary

Main Installation Steps

Disengage Cabinet Slide Assembly

Disengage cabinet slide assembly from unit by pressing release levers and pulling unit away.

Center Cabinet Slide Assembly

Center cabinet slide assembly on cabinet floor 7/8" from front outside edge.

Mount Cabinet Slide Assembly

Mount cabinet slide assembly to cabinet floor with (4) #8 x 3/4" screws.

Engage Product Slide Assembly

Engage product slide assembly to cabinet slide assembly, ensuring tracks are flush.

Attach Door to Unit

Attach door to unit using (4) 6 x 1/2" flat head screws and adjustable brackets.

Door Adjustment Section

Adjust Door Tilt

Adjust door tilt by tightening or loosening screws for desired positioning.

Adjust Door Side-to-Side

Adjust cabinet door side-to-side using 'Lock Nut' and 3/8" nut driver.

Secure Door Adjustment

Tighten 'T-Nut' to lock filler against adjustment screws.

Rub Bushing Installation

Install Rub Bushings

Install rub bushings using the provided kit and instructions, may require unit removal.

Rev-A-Shelf 448 Specifications

General

Brand	Rev-A-Shelf
Model	448
Category	Indoor Furnishing
Language	English