Rev-A-Shelf 4WKB-1 User Manual

The 4WKB-1 Knife Block is designed to be trimmed in order to fit into most drawers.
1. Measure drawer opening.
12400 Earl Jones Way, Louisville, KY 40299
(800) 626-1126 | rev-a-shelf.com
I-4WKB-0415
4WKB-1 WOOD KNIFE BLOCK
INSTALLATION
INSTRUCTIONS
2. Measure the knife block to see where you will
need to trim.
3. Flip board over and remove any screws that
would be in the way of the cutting path.
Note: Divider can be removed and trimmed to
proper height.
4. Simply drop in drawer.
Table saw
recommended.

Rev-A-Shelf 4WKB-1 Specifications

General

Brand	Rev-A-Shelf
Model	4WKB-1
Material	Wood
Primary Color	White
Number of Bins	1
Color	White
Width	15 inches
Type	Kitchen Cabinet Organizer
Product Type	Waste Bin
Installation Type	Cabinet Mount

Summary

4WKB-1 Wood Knife Block Installation

Measure Drawer and Knife Block

Measure the drawer opening and the knife block to determine necessary trimming for a proper fit.

Prepare Knife Block for Cutting

Flip the board over and remove any screws that obstruct the cutting path before trimming.

Trim and Insert Knife Block

Trim the knife block as needed and insert it into the drawer. The divider can also be trimmed.