Rev-A-Shelf 448 Series User Manual

INSTALLATION INSTRUCTIONS: 448 SERIES PULLOUT WALL CABINET ORGANIZER W/ SOFT-CLOSE
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
448 SERIES PULLOUT WALL CABINET ORGANIZER W/ SOFT-CLOSE
TOOLS REQUIRED:
30-45 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
I-448BBSCWC-0817
#2
3
8
3
32
THIS UNIT CAN BE INSTALLED IN 2 WAYS
FOR INSTALLATION WITH WOOD SCREWS, TURN TO PAGE 2
FOR INSTALLATION WITH MACHINE BOLTS, TURN TO PAGE 3
WATCH TUTORIALS OF OUR
PRODUCTS BEING INSTALLED
WWW.REV-A-SHELF.COM/VIDEOS
3
8

Rev-A-Shelf 448 Series Specifications

General

Brand	Rev-A-Shelf
Model	448 Series
Category	Indoor Furnishing
Language	English

Summary

INSTALLATION WITH WOOD SCREWS

Remove Slide Set

Flip unit upside down, pull slide set to open, press triggers to remove.

Template Placement and Hole Marking

Place template flush with cabinet front, punch hole locations.

Pre-drill and Secure with Wood Screws

Pre-drill marked holes, secure slide set to cabinet floor using wood screws.

Re-attach Wood Frame

Re-attach wood frame to slides, ensure ball-bearing tracks are at front.

INSTALLATION WITH MACHINE BOLTS

Template Placement

Place template flush with the front of the cabinet frame.

Drill Cabinet Floor for Bolts

Drill through marked holes using a 3/8" drill bit into the cabinet floor.

Secure with Machine Bolts

Place unit over holes, secure with machine bolts and nuts.

DOOR MOUNTING INSTRUCTIONS

Adjust Door Mounting Brackets

Loosen lock nuts, pull brackets to ensure mounting to thick door portion.

Measure Door and Cabinet Openings

Measure total door opening (a) and cabinet door height (b).

Calculate Door Placement Adjustments

Adjust measurements based on door size relative to cabinet opening.

Mark and Pre-drill Door Holes

Mark screw locations on the rear of the cabinet door and pre-drill.