Rev-A-Shelf CO Series

To Next Page

INSTALLATION INSTRUCTIONS: COOKWARE ORGANIZER

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

CO AND 5CW2 SERIES

I-CO5CW2-0521

* CO-15 and 5CW2-1222 Series come with 7 Dividers and 1 Handle Bar.

CO-21 and 5CW2-2122 Series come with 14 Dividers and 2 Handle Bars

**Extra screws are provided in case one is lost or misplaced.

TOOLS REQUIRED:

20 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and wipe

parts dry.

PARTS LIST

No. Description Qty.

A Dividers* 7 14

B Handle Bar* 1 2

C U-Shaped Support Brackets 2

D Upper Slide Shelf 1

E Lower Slide Shelf 1

F #8 X 3/4” Truss Head Screws 4

G M4 X 8 Flat Head Machine Screws 16

H #8 x 1/2” Pan Head Wood Screws 5

#2#2#2

Note 1: Be sure to measure cabinet opening and basket width to make sure basket will clearly pull out of the cabinet without interference.

Note 2: All cabinets are built and constructed differently, some have a built-in shelf that is not easily removeable. This organizer can still be

installed with the shelf in place, but note some taller items could hit the shelf when opening and closing.

WATCH TUTORIALS OF OUR

PRODUCTS BEING INSTALLED

WWW.REV-A-SHELF.COM/VIDEOS

Need help?

Do you have a question about the Rev-A-Shelf CO Series and is the answer not in the manual?

Summary

Care and Maintenance

Installation Steps

Step 1: Detach Slides from Baskets

Remove slides from baskets by pressing release triggers on both sides.

Step 2: Attach Bottom Slides to Support Bracket

Attach bottom slides to the U-shaped support bracket using machine screws.

Step 3: Attach Top Slides to Support Bracket

Attach top slides to one of the height options on the U-shaped support bracket.

Step 4: Install Unit into Cabinet

Slide the unit into the cabinet, avoiding interference with hinges.

Step 5: Secure Slides to Cabinet Face Frame

Attach slides to cabinet face frame, 1/4" back from the opening.

Step 6: Attach U-Shaped Unit to Cabinet Floor

Use wood screws to attach the U-shaped unit to the cabinet floor.

Step 7: Attach Rear Metal Sockets

Push rear sockets to the cabinet rear and attach with wood screws.

Step 8: Re-engage Shelves into Slides

Carefully re-engage shelves into slides, avoiding force to prevent damage.

Step 9: Attach Wire Dividers

Attach wire dividers to the lower basket, adjusting for cookware size.

Optional Door Mount Kit