Rev-A-Shelf 5330 Series User Manual

INSTALLATION INSTRUCTIONS: 5330/5386 SERIES PULLOUT BASKET WITH SOFT-CLOSE
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
5330/5386 SERIES PULLOUT BASKET WITH SOFT-CLOSE
TOOLS REQUIRED:
30 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
I-53XX-0417
#2
3
32
3
mm
Parts List
No. Description Qty
1A Solid Bottom Basket 1
1B Solid Bottom U-Shaped Basket 1
2 Bottom Mount Brackets 4
3 Slides 2
4 Release Levers 2
5 Rear Slide Brackets 2
6 Bracket Spacers 4
7 Side Mount Brackets 4
8 Mounting Brackets 2
9 Door Mounting Brackets 2
10 M4x6 Machine Screws 8
11 M4x10 Machine Screws 12
12 Euro Screws 4
13 1/4-20x1/2” Screws 4
14 #6x1/2” Flathead Screws 6
15 #6x3/4” Flathead Screws 4
16 #8x5/8” Truss Head Screws 8
1A)
1B)
2) 3)
5)
6)
7)
FOR SIDE
MOUNTING
ONLY
FOR BOTTOM
MOUNTING ONLY
8) 9)
10)
11)
13)
WATCH TUTORIALS OF OUR
PRODUCTS BEING INSTALLED
WWW.REV-A-SHELF.COM/VIDEOS
FOR BOTTOM MOUNTING, PROCEED TO PAGE 2
FOR SIDE MOUNTING, PROCEED TO PAGE 3
OR
4)
14)
15)
16)
12)

Rev-A-Shelf 5330 Series Specifications

General

Brand	Rev-A-Shelf
Model	5330 Series
Category	Indoor Furnishing
Language	English

Summary

Bottom Mounting Instructions

Attach Bottom Mount Brackets

Attach bottom mount brackets to front and rear of each slide using M4x10 screws.

Position Template and Pre-drill Holes

Place template on cabinet floor and pre-drill hole locations for slide installation.

Secure Slides to Cabinet Floor

Attach slide to the floor using #8x5/8" truss head screws on each slide.

Install Bottom Mount Spacers and Levers

Snap bracket spacers to rear slide bracket and install release levers.

Insert Basket onto Bottom Slides

Place basket on slides and push back until it locks securely.

Side Mounting Instructions

Attach Side Mount Brackets

Attach side mount brackets to the front of the slides using M4x10 flathead screws.

Position Side Template and Pre-drill

Place side mounting template to cabinet side and pre-drill hole locations.

Mount Slide Assembly to Cabinet

Place slide assembly on cabinet mounting bracket, insert M4x10 screws, and adjust width.

Install Side Mount Spacers and Levers

Snap bracket spacers to rear slide bracket and install release levers.

Insert Basket onto Side Slides

Place basket on slides and push back until it locks securely.

Door Mounting Instructions

Attach Bracket to Tray and Door

Attach mounting bracket to tray, insert screws, then insert door mounting bracket.

Engage Tray with Slides

Place tray on slides and push back until basket locks securely.

Mount Brackets to Door

Use door mounting measurements to mount brackets to the door with #6x1/2" flat head screws.