STEP 2:
USING THE BODY PADS
REVITIVE comes with one pair of reusable (up to 20-30 applications)
Electrode Body Pads that can be used to deliver electrical stimulation to
the back, shoulders, thighs, knees or arms.
a Select the area you wish to apply electrical stimulation to.
Example Body Pad placements are shown below:
Do NOT use the Body Pads on your head, face, neck or chest.
Instructions for use
Thigh Knee
Back of
Shoulder
Upper Back
Lower Back
✔
✔
✔
✔
✔
✔
b Clean and dry the area where you will place the Body
Pads.
c Make sure REVITIVE is switched off. If the control panel
is still illuminated, press the power button and turn
REVITIVE off.
d Attach the ends of the Body Pads to the Body Pad
Cords.
Press connectors until no gap is between them.
Leaving a gap may cause discomfort.
e Plug the other end of the Body Pad cord into the
opening on the side of REVITIVE
Plugging in the Body Pad cord will automatically
turn the foot-pads off.
f Remove the plastic liner from the Body Pads, by
peeling it off carefully. Replace the Body Pads onto the
plastic liner after use.
g Press the Body Pads on the area(s) you wish to apply
electrical stimulation, as shown on page 16, gently
pressing the adhesive side against the skin.
To Next Page
Loading...
