Why is the image quality poor on my Revo Security Camera?
Poor image quality can often be improved by increasing the lighting at the monitored location. Ensure there is sufficient lighting and check all image and lighting settings.
What to do if my Revo Security Camera images are blurred?
If the images from your Revo Security Camera appear blurred, try refocusing the camera.
How to fix Revo Security Camera if I cannot log in?
If you cannot log into your Revo Security Camera, and HTTPS is enabled, make sure that you are using the correct protocol (HTTP or HTTPS). You may need to manually type 'http' or 'https' in your browser's address bar.
What to do if my Revo Security Camera video cannot be recorded?
If your Revo Security Camera video cannot be recorded, verify that the SD Card is properly inserted and formatted correctly.
Why is my Revo Security Camera only showing images in black and white?
If your Revo Security Camera is only showing images in black and white, check the Video & Image settings.
What to do if my Revo Security Camera has distorted audio?
If the audio from your Revo Security Camera is distorted, ensure that the correct Audio Input source is selected. Choose 'Microphone' for an external microphone or 'Line' for a line-in source.
Why is my Revo Security Camera H.264 not displayed in the client?
If H.264 is not displayed in the client for your Revo Security Camera, check that the correct network interface is selected in the Video & Image/Stream settings.
What to do if my Revo REHXN0412-1 Security Camera has poor audio quality?
If you are experiencing poor audio quality with your Revo Security Camera, too many users/clients connected to the camera may be the reason. Try limiting the number of clients allowed to connect.
How to fix rolling dark bands or flickering in Revo Security Camera image?
To address rolling dark bands or flickering in your Revo Security Camera image, try adjusting the Exposure Control setting under AE and AWB part.
What to do if my Revo REHXN0412-1 has a poor or intermittent network connection?
If your Revo Security Camera experiences a poor or intermittent network connection, and you are using a network switch, check that the port on that device uses the same setting for the network connection type (speed/duplex).
General| Night Vision | Yes |
|---|---|
| Weatherproof | Yes |
| Weather Resistance | IP66 |
| Power Supply | 12V DC |
| IR Range | 20m |
| Operating Temperature | -20°C to 50°C |
Covers warnings, cautions, and general safety advice for operating and installing the device.
Details the meaning of warning symbols used in the manual and on the equipment.
Information regarding FCC and CE compliance for radio frequency emissions.
Lists and illustrates the items included in the network camera package.
Highlights the main functionalities and technical advantages of the network camera.
Identifies and describes the external ports and controls on the camera unit.
Guides on installing and adjusting auto iris, DC auto iris, manual iris, and back focus.
Details how to connect the camera to RJ-45, alarms, video output, and power.
Explains how to connect the camera to the network and assign an IP address using SmartManager.
Covers browser access, internet access, and initial admin password setup.
Details live view page features, general controls, toolbar, and video/audio streams.
Comprehensive guide to setting up basic, video, audio, event, device, and system parameters.
Covers reviewing recordings, accessing help, and resetting the device to factory defaults.
Lists common problems and their possible causes and corrective actions.
Diagram for alarm connection and steps for routine preventive maintenance.
Comprehensive list of technical details including sensor, lens, compression, protocol, and power.
To Next Page
