Why can't some clients access my Revo REHXN0412-1 Security Camera?
If some clients cannot access your Revo Security Camera, and you are using a proxy server, try disabling the proxy setting in your browser. Also, check all cabling and connectors.
How to fix slow updating of images or no image using Refresh on Revo REHXN0412-1 Security Camera?
If you experience slow updating of images or no image when using Refresh on your Revo Security Camera, and the images are very complex, try limiting the number of clients accessing the camera.
Why does my Revo REHXN0412-1 work locally but not externally?
If your Revo Security Camera works locally but not externally, check if there are firewall settings that need to be adjusted and if there are router settings that need to be configured.
How to fix Revo REHXN0412-1 Security Camera if it cannot be accessed via a host name?
If your Revo Security Camera cannot be accessed via a host name, ensure that the host name and DNS server settings are correct.
Why is the color saturation different in H.264 and Motion JPEG on my Revo Security Camera?
If the color saturation is different in H.264 and Motion JPEG on your Revo Security Camera, modify the settings for your graphics adapter. Please see the adapter's documentation for more information.
General| Night Vision | Yes |
|---|---|
| Weatherproof | Yes |
| Weather Resistance | IP66 |
| Power Supply | 12V DC |
| IR Range | 20m |
| Operating Temperature | -20°C to 50°C |
Covers warnings, cautions, and general safety advice for operating and installing the device.
Details the meaning of warning symbols used in the manual and on the equipment.
Information regarding FCC and CE compliance for radio frequency emissions.
Lists and illustrates the items included in the network camera package.
Highlights the main functionalities and technical advantages of the network camera.
Identifies and describes the external ports and controls on the camera unit.
Guides on installing and adjusting auto iris, DC auto iris, manual iris, and back focus.
Details how to connect the camera to RJ-45, alarms, video output, and power.
Explains how to connect the camera to the network and assign an IP address using SmartManager.
Covers browser access, internet access, and initial admin password setup.
Details live view page features, general controls, toolbar, and video/audio streams.
Comprehensive guide to setting up basic, video, audio, event, device, and system parameters.
Covers reviewing recordings, accessing help, and resetting the device to factory defaults.
Lists common problems and their possible causes and corrective actions.
Diagram for alarm connection and steps for routine preventive maintenance.
Comprehensive list of technical details including sensor, lens, compression, protocol, and power.
To Next Page
