Revolution 3D Printers INFINITY 3D - Specifications; Printer Style; Printing Capabilities; Physical Dimensions

To Next Page

To Previous Page

Revolution 3D Printers INFINITY 3D

8-Sep-14 2 2

Specifications

Printer Style

 FFF(Fused Filament Fabrication)

 Cartesian Robot

 Open Frame

Printing

 Print Surface: Heated bed

 Print Area: 215mm x 215mm x 220mm (8.5in x 8.5in x8.7in)

 Print Volume: 10,170cm

(625 in

) of usable space

 Top Print Speed: 100mm/sec (4.1in/sec)

 Print Tolerance: 0.1mm (0.0039in) in X and Y axes. Z axis is dependent on layer

thickness

 Layer Thickness: 0.075mm to 0.35mm (0.003in - 0.0138in)

 Supported Materials: ABS, PLA, HIPS, PVA, and wood filaments

 Usable Filament Sizes: standard 1.75mm (0.068in)

Physical Dimensions

 Overall Dimensions: 520mm x 550mm x 480mm (20.5in x 21.6in x 18.9in)

 Weight: 11kg (24.25lbs)

Electrical

 Power Requirements: 110 - 220 VAC

 Temperature: Maximum operating temperature (Extruder), 315C (600F)

 Temperature: Maximum operating temperature (Heated Bed), 110C (230F)

Operations Manual

INFINITY 3D Operations Manual by Revolution 3D Printers

Permission is granted to copy, distribute and/or modify this document under the terms of

the Creative Commons Attribution-Share Alike 3.0 Unported license (CC BY-SA 3.0).

Published by Revolution 3D Printers, Victoria, BC

For more information, call +1-877-269-5510 or go to www.Revolution3DPrinters.com

Other manuals for Revolution 3D Printers INFINITY 3D