Revolution 3D Printers INFINITY 3D - 3 D Printer Software; Software Overview; Recommended Software

Revolution 3D Printers INFINITY 3D
8-Sep-14 6 6
3D Printer Software
Software Overview
Revolution 3D Printers, makers of the INFINITY 3D printer, completely
supports free/libre hardware and software. Along with the INFINITY 3D being a
free/libre hardware design, it has been tested to work with 100% free/libre
software.
To operate your INFINITY 3D printer you will need to install a few software
packages.
You will need
 Slicing Software to convert an .STL to .gcode machine language
It is optional to have
 CAD or 3D Modeling Software
 3D Design Optimization & Repair software
Recommended software
MatterControl
Required
Printer
Dashboard/slicer
Included with
purchase
Slic3r
Optional/Required
for DPE
Slicing Software
Free open source
GeoMagic
Optional
CAD 3D Modeling
Software
Free trial version
available
NetFabb
Basic
Optional
Design Optimization &
Repair
Free version
available
The recommended software links can be found in the Support/Downloads section of
Revolution3DPrinters.com
You can also find downloads, drivers and configuration files specific to the
INFINITY 3D printer at Revolution3DPrinters.com. Your printer has been pre-
loaded with the necessary drivers.