Revox B251 User Manual

Procedure:
-
Press buttons
VOLUME
[25]
and INPUT
1201.
-
Play a
piece
of music from that
is
suitable for making adjust-
ments.
This input is used as the reference.
-
Press buttons
VOLUME
[25]
and INPUT
[20].
-
Alternately
press
the reference button and the
next input but-
ton to compare
the level and adjust
by
ear as required by
pressing
the
VOLUME
buttons
[28]
and
[29].
Note: the
position
of the
illuminated bar
on the
display
does
not
indicate the
level of the
signal.
lt is an indication
of
how
much the signal
must be
amplified/attenuated
in order to
ob-
tain
the same output
level.
lf the
flashing dot
moves to the
left- or
right-hand limit
position,
no further amplification/attenuation
is
possible.
B
251
.
INTFGRATED AMPLIFIEN
-
lf a correction
was
necessary.
the
setting
must be
newly
stored.
Ensure that
the selection button of
the input
to be
repro-
grammed
is
pressed.
-
Press STORE
button
[23].
The new setting
is now stored.
All
inputs can
be checked and readjusted to
the same
level by
following this
procedure.
r
t_
12

Revox B251 Specifications

General

Type	Integrated Amplifier
Frequency Response	20Hz to 20kHz
Weight	12kg
Output	Pre out
Speaker Load Impedance	4Ω - 8Ω
Input Impedance	47kΩ