The Smart Remote
Contrcl User's Manual
Inserting
the batteries
To insert the batteries, refer
to the following illustration
and
instructions:
1. Remove
battery
cover,
Ensure
that
you
insert
the batteries
according to
the marking
inside the
battery case.
Figure 2-1 : lnserting the batteries
l.
Locate the battery bay cover at
the
back
of the Smart Remote
Control.
2. Put
your
thumb in the battery cover slot
and
pull
to remove the
cover.
3.
Insert the
batteries
into
the bay
in
the
direction indicated in the
battery compartment.
4. Replace the battery
bay
cover. You will hear it click into
place.
Power supply
To Next Page
Loading...