Revox SRC-2000 User Manual

The
Smqfi
Remote
Control
(Jser's
Menual
Adjusting
the
LCD
backlight
From
the
"other"
menu.
the
following
screen:
scroll
to Backlight
and
press
enter.
You
see
lndicates
the
current
---_
backlight
sensitivity
level.
P ress
to decrease
the duration
that
the backlight
stays
on.
P ress
to
turn the
backl ig
ht
-ofl
and on.
Press
to increase
the
backlight
sensitivity
lev e l.
\
Press
to
decrease
the
backlight
sensitivity
lev
e l.
\
Press
to increase
the
duration
that
the
backlight
stays
on.
Figure
4-16:
Adjusting
the backtight
The
backlight
detects
the ambienr
light
brightness
or dimness
and will
turn
on according
to
the
setting
in this
screen.
Press
and
hold the
Hardware
Access
Power
button
to
automatically
adjust
the
sensitivity
level
of the
LCD
panel
to
the ambient
light.
Alternatively
you
can press
the
+ and
-
buttons
to
manually
set the
backlight
sensitivity.
o
Press
+ to
increase
the
sensitivity
ofthe
backlight
to the
ambient
lighting.
A
high
number indicates
that
a
greater
decrease
of
the
brightness
in
the ambient
lighting
will
automatically
switch
the
backlight
on.
o
Press
-
to decrease
the
sensitivity
of the
backlight
to the
ambient
lighting.
A low
number indicates
that
a slight
decrease
of the
brightness
in rhe
ambient
lighting
will
automatically
switch
the backlight
on.
When you
have
finished
adjusting
the
backlight, press
enter
to
save
your
changes
and return
to the
other
menu.
46
Making
LCD
adjustments

Revox SRC-2000 Specifications

General

Brand	Revox
Model	SRC-2000
Category	Remote Control
Language	English