21
Switching off the ignition and starting the engine - standard key variant with LCD display
T
1. Switching off the ignition and starting the engine - standard key variant with LCD display
2. Switch off the engine by setting the “kill-switch” to "OFF".
3. Switch the “kill-switch” back to "ON".
4. Turn the selector lever to "P" to make sure the trike is secured against rolling away.
5. Press the start button on the right handle switch and the display will turn off.
6. Turn the ignition key to the left until it can no longer be turned.
7. You can leave the trike. The trike is locked!
If the key is not turned to the left to "OFF", the display switches on and off at intervals to draw attention to this circumstance.
Functions and settings
To Next Page
Loading...
