EasyManua.ls Logo

Rewaco GT 2021 - Turn Signal Warning and Power Shifter

Rewaco GT 2021
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Turn signal warning
As an option, the vehicle can be equipped with a turn signal warning function. The turn signal warning function emits a warning tone after a longer sequence of
turn signal intervals to indicate that the turn signal is switched on. The warning tone is switched off by briefly applying the brake and switching off the turn
signal. This process repeats at intervals as long as the turn signal is on. If the service brake is applied during the turn signal phase (waiting at a traffic light), the
interval warning tone is deactivated during this time, but is reactivated after the brake is released until the turn signal is switched off.
Using the Power Shifter (optional)
If the vehicle is equipped with a power shifter and the "S" driving mode is selected, the gears can be shifted manually. On the LCD display, the red "S" for the
selected Sport mode is displayed in white when you switch to Power Shifter mode. Now you can manually shift the gears up and down on the left handlebar
using the Power Shifter pushbuttons. After you have switched back to driving mode "D", the transmission shifts automatically again. Use the + button to shift to
the next higher gear, and the - button to shift to the next lower gear!
A short impulse of the power shifter to + shifts manually to a higher gear, pulling back to a lower gear. When the maximum engine speed is reached, the next
higher gear is engaged automatically. If the engine speed drops below 1500 rpm, the next lower gear is automatically engaged. At standstill, 1st gear is
preselected.
Exit the Power Shifter function
To change from the powershift function to the automatic function, move the selector lever to drive gear "D" without operating the lock. The transmission is now in
automatic mode again. From "D", you can then shift back to "S" drive mode.
-
+
Functions and settings

Related product manuals