• Reading 12 - reading in succession:
Press and release the START button consecutively to recall the last 12
readings in succession.
Pressing and releasing the START button after the last 12 readings have been
recalled will resume the above sequence from reading 1.
9. MEASURING SURFACE TEMPERATURES
1. Remove the forehead probe.
2. Press the ON/OFF button, after one beep sounds the thermometer is ready for
use.
3. Aim the thermometer probe at the desired surface and press the START
button.
10. CARE AND CLEANING
Use an alcohol swab or cotton tissue moistened with alcohol (70% Isopropyl)
to clean and disinfect the thermometer casing and the measuring probe.
Ensure that no liquid enters the interior of the thermometer. Never use abrasive
cleaning agents, thinners or benzene for cleaning and never immerse the
instrument in water or other cleaning liquids. Take care not to scratch the
surface of the probe lens and the display.
To Next Page
Loading...
