Getting Started
Quick Start
19
@2017 REXING All Rights Reserved.
Installation
Video guide available at video.rexingusa.com
1. Attaching the front camera to the window mount
Fix the recorder in the position of rear view mirror and connect it to cigarette
lighter via car charger.
Note: You can lay out the extended charging/power supply wiring along the
edge of windshield. Optional rear camera is installed in the rear of the vehicle,
and you need to pay attention to the direction of the installation. Wiring can be
laid along the roof of a vehicle. After installation is complete, put camera plug
into the recorder’s rear camera port. Adjust the lens position to ensure that the
lens level with the ground. Start the engine to check if the device has been
installed correctly.
To Next Page
Loading...
