Rexing R1 - Turning the Device On and Off

Getting Started
Quick Start
25
@2017 REXING All Rights Reserved.
Turning the Device On and Off
Press and hold the ON/OFF button for a few seconds to turn on the device.
A welcome message will be displayed onscreen as shown in the image below.
To turn off the device, again press and hold the ON/OFF button for a few
seconds. A goodbye message will be displayed onscreen as shown in the
image below.
Note: The camera will switch on and off automatically if you keep it permanently
connected to the car charger. The camera will automatically start recording
when power on.
***If your car cigarette lighter provides constant power to the Dash Cam, the
unit will not turn on and off with the vehicle, and will instead remain on.***