14
To playback a video on the computer either use an
SD card adapter or connect the device to the computer directly
using the USB cable.
To playback a video using an SD card adapter,
remove the memory card and insert it into an SD card adapter.
Place the adapter in the computer.
Connect USB
connector to
computer
Select Mass Storage
To playback a video using USB cable, connect the
USB Cable to the device and the computer. After the device
powers up, press the OK Button to select Mass Storage.
On the computer, navigate to device drive. The videos are
stored at: the “Front_xxx” subfolders respectively. Locked
videos can be found on the memory card under the
“front_emr” folder.
To Next Page
Loading...
