Need help?Do you have a question about the Rexing V1-4K and is the answer not in the manual?
Attach the mount plate with 3M adhesive to the windshield, ensuring correct orientation.
Insert a compatible Micro SD card until it clicks, ensuring the device is powered off.
Connect the charger, power on the device, and format the memory card via the setup menu.
Place the camera on the mount, route the power cable, and connect the charger to the vehicle.
Enable parking surveillance using a Smart Hardwire Kit for automatic mode switching based on engine status.
Open the Rexing Connect app and hit "Connect" to access live view and download recordings.
General| GPS | Yes |
|---|---|
| G-Sensor | Yes |
| Loop Recording | Yes |
| Parking Mode | Yes |
| Operating Temperature | -20°C to 70°C (-4°F to 158°F) |
| Wi-Fi | No |
| Video Resolution | 3840 x 2160 |
| Lens | 170° Wide Angle |
| Display | 2.4 inch LCD |
| Storage | Supports up to 256GB microSD |
| Night Vision | Yes |
| Battery | Built-in rechargeable battery |
To Next Page
