Rexing V1-4K - Installation; Installing the Dash Cam Mount

Step 1: Installing the Electrostatic Stickers
Step 2: Install the Dash Cam
6
4. Installation
1.1 Prepare Your Windshield
Thoroughly cleanse your windshield with either water or alcohol.
Follow this by wiping it dry using a clean, dry cloth to ensure a
spotless surface.
1.2 Position the Sticker
Next, carefully peel off the protective film from the electrostatic
sticker. Attach the sticker to the windshield, ideally behind the
rear-view mirror. This position is recommended to avoid
obstructing your view while you're on the road.
Electrostatic
sticker
Place the 3M adhesive on the mount plate and properly orient
the mount piece to the roof and hood line of the vehicle.
Important! Ensure the T-interlock on the mount is oriented in
the correct direction. Firmly press the mount onto the
windshield.
Orient the mount as shown