15
easily be locked and the video cannot be deleted by the
loop recording function. This will cause the memory card to
be full of locked videos and cause the recorder to fail to
work normally.
Please DO NOT ENABLE the Parking Monitor function in the
settings of the dash cam WITHOUT connecting a smart
hardwire kit. Otherwise it may case a malfunction.
Option 2: Motion Detection
To use this feature, you need to connect it with a Rexing
Intelligent Hardwire Kit (sold separately).
Once the sensor has detected MOTIONS. The intelligent
hardwire kit will power up the dash cam automatically and
start recording until the MOTION is cleared.
Please go to https://www.rexingusa.com/hwk-install/ to
watch a video tutorial about the installation or scan the QR
code below.
Make sure that the Parking Mode is turned off on your
dash cam, otherwise it may cause a malfunction.
To Next Page
Loading...
