V1P 3rd Gen Manual
32
©2018 REXING All Rights Reserved
Record Audio
Default setting: On
Allows you to enable or disable audio recording with your videos.
You may choose to record audio with video, or turn off the microphone so that
all recorded videos will be muted.
Note: You can also use the MIC button to toggle auto recording.
Date Stamp
Default setting: On
Stamp the date and time to the bottom of your videos. Note that the date and
time stamp cannot be removed from videos if this feature was enabled at the
time of recording.
Gravity Sensing
Default setting: Low
If a change in gravitational forces is detected, such as in the event of a
vehicular accident, the g-sensor will signal to the camera, and an automatic file
lock will be placed on the current video, preserving your most crucial footage.
Locked videos can be found on the memory card under “\CARDV\MOVIE\RO”.
Note: Locked video files won’t be erased by Loop Recording, they will remain
on the memory card until they are manually deleted, or when the card is
formatted.
To Next Page
Loading...
