Rexing V1P 3rd Gen - Language; Frequency; Screen Saver; Daylight Saving

V1P 3rd Gen Manual
35
©2018 REXING All Rights Reserved
Language
Default setting: English
Set your preferred device language.
Frequency
Default setting: 60Hz
Power supply specification used in your country or geographical region. United
States users should use 60Hz (default).
Screen Saver
Default setting: Off
Specifies the duration for which the display will stay on after the device is
powered on. Having this setting disabled (default) will keep the display on
constantly. You can press any button to wake the device from screen saver
mode.
Daylight Saving
Default setting: Off
When enabled, time is advanced forward by 1 hour to match daylight savings
time.
GPS
Default setting: mi/h
Display speed information at the bottom of your recordings (GPS Logger
required).