REYHEE Roamer - Roamer Pre-Ride Checklist; Locking and Unlocking Armrests

Pre-ride checklist
All parts should be completely DRY.
Check the presence, condition, and functionality of ALL PARTS before each use, including
wheels, frame, controller, battery box, cables, and seatbelt.
2)
1)
If there is any doubt or observation of damage/wear/tear on any of the checklist
items, moisture detected on any electronic parts, any unusual noise/vibration/
change in ease of use, DO NOT use the product and contact customer support.
Make sure that any exposed joints, screws, and bolts are tightened. (Tools not included with
the product.)
3)
Ensure that there are no obstacles or obstructions ahead in the intended pathway.
Check to make sure the battery is sufciently charged.
5)
4)
Ensure that there is only ONE user riding at a time.6)
Ensure that the maximum weight capacity (300 lbs or 136 kg) is NOT being exceeded.7)
Before each use of the product, the user must follow the pre-ride checklist below.
DO NOT use excessive force or pressure on the armrest (e.g. yanking it violently up and
down), as it may cause irreversible product damage.
•
Always keep ngers, hands, and any other body parts safely OUT OF THE WAY of the
armrest folding mechanism (bar/post/joints), to prevent potential injury when lifting and
lowering the armrest.
If intending to get in or out of the Roamer after lifting an armrest, ensure the armrest is lifted
ALL THE WAY UP before safely getting in or out of the Roamer.
•
•
How to lock and unlock the armrests
It is NOT recommended to operate the Roamer with any armrest unlocked or lifted up, as it
may present a safety issue.
•
WARNINGS
How to Operate Your Roamer (Cont.)
28