To Next PageTo Next Page
Need help?Do you have a question about the Reznor SC and is the answer not in the manual?
Lists the primary operational and technical characteristics of the Model SC duct furnace.
Details the available options that can be pre-installed on the unit.
Lists additional options that can be installed after the unit is delivered.
Presents a summary of technical data including input/output capacity and airflow.
Information on ANSI Z83 standards and certifications for commercial use.
Details local and national codes governing the installation of the unit.
Guidance on selecting the best placement for the duct furnace for performance.
Explanation of the separated combustion design and its application benefits.
Critical warning about chlorine vapors causing corrosion to the heat exchanger.
Mandatory requirements for installing the combustion air and vent system.
Instructions for ensuring secure ductwork joints to prevent air leakage.
Table showing net and shipping weights for all unit sizes.
Minimum clearances from the unit to combustible surfaces.
Performance data table for CFM and pressure drop at various temperature rises.
Critical safety information regarding fire and explosion risks.
Essential steps to follow in the event of smelling gas.
Information for contacting Reznor representatives and accessing further product materials.
Lists the primary operational and technical characteristics of the Model SC duct furnace.
Details the available options that can be pre-installed on the unit.
Lists additional options that can be installed after the unit is delivered.
Presents a summary of technical data including input/output capacity and airflow.
Information on ANSI Z83 standards and certifications for commercial use.
Details local and national codes governing the installation of the unit.
Guidance on selecting the best placement for the duct furnace for performance.
Explanation of the separated combustion design and its application benefits.
Critical warning about chlorine vapors causing corrosion to the heat exchanger.
Mandatory requirements for installing the combustion air and vent system.
Instructions for ensuring secure ductwork joints to prevent air leakage.
Table showing net and shipping weights for all unit sizes.
Minimum clearances from the unit to combustible surfaces.
Performance data table for CFM and pressure drop at various temperature rises.
Critical safety information regarding fire and explosion risks.
Essential steps to follow in the event of smelling gas.
Information for contacting Reznor representatives and accessing further product materials.
This document describes the Reznor Model SC gas-fired, indoor, commercial/industrial, separated-combustion duct furnace.
The Reznor Model SC is a gas-fired duct furnace designed for heating commercial and industrial spaces. It is intended for indoor installation and utilizes a separated-combustion system, meaning that air for combustion is drawn from outside the building, and flue gases are discharged to the outside atmosphere. This design makes the unit suitable for environments with dust or corrosive fumes, as it prevents these contaminants from entering the combustion process. The furnace is designed to be connected to an external air handler, forming part of a customized air handling system. It provides heated air to a duct system, which then distributes it throughout the space. The unit is certified by ANSI Z83 family of standards for safe usage in industrial/commercial settings, including makeup air applications for corridor pressurization in commercial buildings. It is not certified for residential heating equipment.
General
