Menu Options
Menus and Operation
Your controller is menu driven. By selecting a particular menu, you can perform many
functions besides just "SEARCHING for satellite".
TO SEARCH
• Press the Power button
o Displayed will be the....
▪ System configuration (software configuration)
• EAGLE 1 SHAW (Triple Satellite xKu LNB)
• EAGLE 2 DIRECTV (SWM 3 LNB)
• EAGLE 3 DISH NETWORK (Triple Satellite 1000.2 LNB or
Hybrid Triple LNBF Hopper 3)
• EAGLE 4 BELL TV (Triple Satellite 1000.2 LNB)
▪ Version of software i.e. yy/mm/dd
▪ Options are accessed by pressing "SELECT" or POWER button the second
time to enter the menu options. To navigate through the options press either
the SEARCH (UP arrow) or STOW (DOWN arrow)
▪
TO ENTER MENU OPTIONS
• Press the Power button again after turning ON the power to enter the "menu" portion of your
system.......
o Press the Up and Down arrows to help you navigate through the menu. Once the
portion of the menu that you want is displayed, press SELECT (POWER button) to
"select" that option....
• 1: shutdown - will turn OFF your controller
• 2: search - will direct the mount to search for your specific satellite
that is specified in your system configuration
• 3: stow - will cause the mount to return to its travel position
• 4. Set Position (Technical Support ONLY Menu)
• 5: Set Trigger (Technical Support ONLY Menu)
To Next Page
Loading...
Need help?
General
