The Eagle Manual
9
Menu Options
enu Optionsenu Options
enu Options
Menus and Operation
Your controller is menu driven. By selecting a particular menu you can perform many
functions besides just "SEARCHING for satellite".
TO SEARCH
•
Press the Power button
o Displayed will be the....
System configuration (software configuration)
• EAGLE
EAGLEEAGLE
EAGLE 1 SHAW (Triple Satellite xKu LNB)
• E
EE
EAGLE
AGLEAGLE
AGLE 2 DIRECTV (SWM 3 LNB)
• EAGLE
EAGLEEAGLE
EAGLE 3 DISH NETWORK (Triple Satellite 1000.2 LNB)
• EAGLE
EAGLEEAGLE
EAGLE 4 BELL TV (Triple Satellite 1000.2 LNB)
Version of software i.e. 14.02.07
Options are accessed by pressing "SELECT" or POWER button again to enter
the menu options. To navigate through the options press either the SEARCH
(UP arrow) or STOW (DOWN arrow)
TO ENTER MENU OPTIONS
•
Press the Power button again after turning ON the power to enter the "menu" portion of your
system.......
o Press the Up and Down arrows to help you navigate through the menu. Once the
portion of the menu that you want is displayed, press SELECT (POWER button) to
"select" that option....
• 1: shutdown - will turn OFF your controller
• 2: search - will direct the mount to search for your specific satellite
that is specified in your system configuration
• 3: stow - will cause the mount to return to its travel position
• 4: move azimuth - pressing and holding the appropriate button will
manually move your mount in azimuth (Up arrow CLOCKWISE,
Down arrow COUNTERCLOCKWISE
• 5: move elevation - pressing and holding the appropriate button will
manually move your mount in elevation (Up arrow UP, Down arrow
DOWN
To Next Page
Loading...
Need help?
General
