The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
Page: 20(21)
6 LED status and patterns of the G-router
The LED patterns used in the G-router can be helpful for troubleshooting. If you are
troubleshooting from a remote location, ask the customer or support engineer to carefully
observe the LED patterns and supply this information to you.
5 Green, GPRS status
6.1 Power LED
The blue power LED is hardwired to the power supply of the G-router and should always be lit
when the unit is in operation.
6.2 Modem status LED
The green modem status LED indicates the current status of the G24 Motorola modem which is
part of the G-router.
6.3 Status LED
The green status LED indicates the current status of the GSM subsystem of the router.
STARTUP
During the startup process, the green status LED should blink; the blue power LED should always
be ON.
Status LED Patterns
The green status LED blinks according to specific patterns during operation of the unit. The
patterns indicate different statuses of the GSM subsystem.
Steady Flashing
(100ms on/100ms off)
Booting, searching for network
To Next Page
Loading...