The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
Page: 6(21)
2 Connectors and status LEDs on the G-router Unit
This section provides an overview of the connectors and status LEDS on the G-router unit.
Figure 1: G-router front view
1 Blue, Power LED
tatus. Flashing when unit is booting
Green, Call. On when GSM connection is active
5 Green, GPRS. On when GPRS connection is established to the
6 Green, Contact/Relay status
Figure 2: G-router rear view
TNC GSM antenna connector
3 Ethernet port, including 802.3af PoE
Low power relay contact for remote control
To Next Page
Loading...