Rheem Air Sourced 270 Ambiheat Sidevent - Page 23

DISPLAY PANEL
23
Timer 2 Setting
The Timer 2 period can be set either immediately after setting the Timer 1 period or independently of setting
the Timer 1 period.
• To set the Timer 2 period immediately after setting the Timer 1 period;
The Timer ’2’ icon will be flashing after having set the Timer 1 OFF minutes.
The Timer ’ON’ icon and either “- - : - -“ or the previously set Timer 2 ON time in the Time / Date
Display Area will illuminate.
◼ Press the “Clock” key.
“- -“ or the previously set ON hour digits for the Timer 1 setting will commence to flash in the
Time / Date Display Area.
The Timer ’2’ icon will change from flashing to a solid illumination.
◼ Follow the procedure as outlined in setting the Timer 1 period. The Timer ’2’ icon will flash or
illuminate instead of the Timer ’1’ icon during the setting procedure.
◼ After the “Clock” key is pressed to save the OFF minutes for the Timer 2 period;
The Timer ’1’, Timer ’2’, Timer ’ON’ and Timer ’OFF’ icons illuminate, and the time is displayed in the
Time / Date Display Area.
• To set the Timer 2 period independently of the Timer 1 period;
◼ Press and hold the “Clock” key until the Timer ’1’ icon commences to flash. This will take 2 seconds.
The Timer ’ON’ icon and either “- - : - -“ or the previously set ON time in the Time / Date Display Area
illuminate.
◼ Press the “Up” or “Down” key.
The Timer ’2’ icon commences to flash.
The Timer ’ON’ icon and either “- - : - -“ or the previously set Timer 2 ON time in the Time / Date
Display Area illuminate.
◼ Follow the procedure as outlined in setting the Timer 1 period. The Timer ’2’ icon will flash or
illuminate instead of the Timer ’1’ icon during the setting procedure.
◼ After the “Clock” key is pressed to save the OFF minutes for the Timer 2 period;
The Timer ’1’, Timer ’2’, Timer ’ON’ and Timer ’OFF’ icons illuminate, and the time is displayed in the
Time / Date Display Area.
Cancelling a Timer Setting
• To cancel the Timer setting:
◼ Press and hold the “Clock” key until the Timer ’1’ icon commences to flash. This will take 2 seconds.
The “Clock” key illuminates red.
The Timer ’ON’ icon and the ON time in the Time / Date Display Area illuminate.
◼ Press the ON/OFF key.
The “Clock” key illuminates blue.
All Timer settings are cancelled.