EasyManua.ls Logo

Rheem Classic Plus Series User Manual

Rheem Classic Plus Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Rheem Classic Plus
®
Series
Side Discharge Heat Pump
FORM NO. P11-821 REV. 1
RP17**H Series
Efficiency: 19 SEER/12 EER/10.7 HSPF
Nominal Sizes 2, 2.5, 3 & 4 Ton
[7.03, 8.8, 10.6 & 14.06 kW]
Cooling Capacities 24 to 45.6 kBTU
[7.03 to 13.36 kW]
Variable speed inverter-driven compressor for maximum
comfort and energy savings. Provides heating down to -5ºF
Outdoor sound levels as low as 53 dBA - quiet operation for
areas with noise constraints
Space saving single fan outdoor unit
High efficiency DC motor
Communicating heat pump with multi-position air handler
Compact size - ideal for areas with tight space constraints
Air
Heat Pumps
RP17**H Series
18.5
Question and Answer IconNeed help?

Do you have a question about the Rheem Classic Plus Series and is the answer not in the manual?

Rheem Classic Plus Series Specifications

General IconGeneral
BrandRheem
ModelClassic Plus Series
CategoryWater Pump
LanguageEnglish

Summary

Model Number Identification and Available SKUs

Physical Data

Electrical Characteristics

Accessories

Noise Level Curves

Noise Level Check Point

Unit Dimensions for RP1724HJVXA and RP1730HJVXA

Unit Dimensions for RP1736HJVXA and RP1748HJVXA

Installation Space for RP1724HJVXA and RP1730HJVXA

Installation Space for RP1736HJVXA and RP1748HJVXA

Wiring for RP1724HJVXA and RP1730HJVXA

Wiring for RP1736HJVXA and RP1748HJVXA

Refrigerant Circuit Information for RP1724HJVXA and RP1730HJVXA

Refrigerant Circuit Information for RP1736HJVXA and RP1748HJVXA

Charge Calculation

Airflow

Capacity Compensation for Pipe Length and Height Difference

Safety Devices

Function Settings

Test Procedures

Test Run Overview

Details on conducting the test run operation to check system functionality.

Test Run Method

Procedure for temporarily disconnecting power and setting DIP switches before testing.

Error Codes

Error Code Display

How to display error codes by pressing the SW1 switch during operation.

Error Location Display

How LEDs A-F indicate the error location and type of error.

Pump Down Operation

Pump Down Procedure

Steps for safely discharging refrigerant before moving or discarding the unit.

Limited Warranty