Rheem CRTGH-95X Series - Page 42

42
Venting
INSTALLATION INSTRUCTIONS
Venting for Direct-Vent Water Heater (cont.)
Alternative Horizontal Vent Installations
Exhaust Vent Pipe
Air Intake Pipe
Inspection
Access Panel
(Optional)
Inspection
Access Panel
(Optional)
Ceiling
Downward Slope
towards termination
1"
from wall
is recommended
Exhaust Vent Pipe
Air Intake Pipe
Flat
Termination
Kit
Inspection
Access Panel
(Optional)
Inspection
Access Panel
(Optional)
Ceiling
Downward Slope
towards termination
Air Intake
Vent
Exhaust
Vent
Alternative horizontal vent termination kits are commercially available. Please refer to the instruction sheet
packaged with the kit for complete installation instructions.
Air
Inlet
Exhaust
Outlet
Pipe
Support
Strap
12"
24"
Max.
Concentric Vent
Termination Kit
Flat Horizontal
Termination Kit
(this termination
can be rotated)
For information about termination kits, refer to "If You Need Service" on page 26, "Call for Assistance" for
the telephone number to speak to Customer Service Representative.
Optional vent diagram (no kit
required)