To Next PageTo Next PageWhat to do if Rheem Raypak CROSSWIND-30-I Swimming Pool Heater does not run?
If your Rheem Swimming Pool Heater isn't running, there are several potential causes. First, check if the main power is off and wait for it to be restored. Ensure the power switch is turned on. Also, inspect the fuse and replace it if it's burnt. Lastly, check the circuit breaker and reset it if it has tripped.
Why is my Rheem Raypak CROSSWIND-30-I running but not heating?
If your Rheem Swimming Pool Heater is running but not heating, consider these possibilities: Check if the air inlet or outlet is blocked and remove any obstructions. The unit might be in a 3-minute protection mode; wait for more than 3 minutes for warming to start. Also, verify that the temperature isn't set too low and adjust the temperature setting accordingly.
General| Brand | Rheem |
|---|---|
| Model | Raypak CROSSWIND-30-I |
| Category | Swimming Pool Heater |
| Language | English |
Definitions of hazard symbols like DANGER, WARNING, and CAUTION.
Crucial safety advice regarding temperature, chemicals, and electrical hazards.
Recommended water chemistry levels and potential damage from imbalance.
Guidance on heater placement, clearances, and piping for optimal installation.
Guidelines for using chemical feeders and chlorinators with the heater.
General guidelines for electrical installation by a licensed electrician.
Details on connecting the unit, power requirements, and NEC compliance.
Setup for connecting external automation controllers for temperature control.
Schematics for Crosswind-30-I and Crosswind-50-I inverter models.
Operation and features of the control display for inverter models.
Operation and features of the control display for On/Off models.
Step-by-step guide for safely starting and operating the heat pump heater.
Routine maintenance tasks for the heat pump heater.
Procedures for preparing the heater for periods of non-use during cold weather.
Instructions for advanced time clock control and extender operation for inverter models.
Lists common failures, their reasons, solutions, and display error codes.
Detailed specifications and performance data for inverter models.
Illustrated breakdown of parts for inverter models with part numbers.
Information on warranty scope, effective date, and coverage periods.
Details on warranty exclusions and procedures for making a warranty claim.
