61
4. "Check your Device" screen will appear. Ensure to
have the heater powered and Wi-Fi signal available
in the area, then press "Ready" button. See Figure
99.
Figure 99. Check your Unit
5. In Android: Depending on your configuration, one
or more devices will appear on the app. Select the
HOTSPOT identifier that matches the unit's display
as shown in Figure 100.
Raymote HPPH-XXXXX
Figure 100. Connect with Android Smart Phone
6. In iPhone: Raymote app will start to scan nearby
heaters. If you have multiple units ready to connect,
stand closer to the unit you want to connect first.
To Next Page
Loading...
